Profile Database Editor
You can access the Database Editor from Tools ribbon > Databases > Profile Database Editor
Database Profie Editor enables users to
- Create Profile – create an entirely new steel section profile
- Create/Edit/Delete/Search Family
- Edit/Delete/Search Profile
- Convert "I" profile to "T" profile
Create Profile 
Use this create an entirely new profile. The steps are as follows :
- Select Profile Type: choose Profile Type, i.e. I, C, L profile > Next
- Profile Calculation: Input /Select all the required files
- Profile Name : The name of the profile in database.
- Family Name : The family name of the profile. Family name can be added/edited via Family Editor (see below)
- Available : The availability of the profile on the market.
- H : Height of the profile.
- B : Flange width of the profile.
- S : Web thickness of the profile.
- T : Flange thickness of the profile.
- Other parameters will depend of the section type
- Click "Next" and the section properties will be calculated. These properties can be over-written.
- Click "Finish" to complete the process
Family Editor – Create/Edit/Delete/Search Family 
Once the user pushes this button (Create/Edit/Delete/Search Family) the following database will be opened:
Here user can view, edit, delete foamily number and name. A family is simply a common group name for a particular section type, e.g. "UPN" & "IPE"
Edit/Delete/Search Profile 
This function enable the user to search, view, edit & delete a section profile.
As shown above, the icons are :
- Delete Selected Profile: Remove the selected profile.
- Edit Selected Profile: You can also double-click on the profile to edit it.
- See Details : View the properties of the profile
- Create Profile with Select : Create a new section profile with the values of the selected profile. This way is easier & more intuitive as you can decide correctly the profile type & family name.
- Export CSV : creates a CSV file of the profile database.
Convert I Profile to T Profile 
This function automatically creates "T" profiles from "I" Profile Family. This is basically cutting "I" Sections to become "T" sections.
- Select the I profile family which you want to convert to "T"
- Select the "T" profile family that the new "T" Section will be added to
- Trim Web : To cut "T" profile such that the length approx. equal to the width, B of the original I section
- Preletter for new profile : Set a prefix to the new "T" profile name.
Click "Next" and a message prompt will appear > Choose YES / NO to confirm / reject